BLOG FOR PIPE BENDING MACHINE
Here you can see the latest information about the hand operated pipe bending machine, digital pipe bending machine, rectangular pipe bending machine, full automatic pipe bending machine, ect and a lot of industry knowledge you want to know.
Home » Blog » Just how do the components of any tube bending machine run?

Just how do the components of any tube bending machine run?

Views:0     Author:Site Editor     Publish Time: 2021-05-05      Origin:Site

There was a time frame when China's scientific and technological development was stagnant on account of government corruption and international aggression, and metalworking was in a backward state. Ahead of liberation, China's industry was already so backward that even tool materials just like high-speed steel and ordinary tools such as twist drills could definitely not be manufactured. After liberation, China's machine tools have had a long improvement.

Nowadays, China's machine tool manufacturing has also largely matured, especially usually machine tools. In the particular production of pipe benders, we have made new advances in conjunction with Western technology. Today we would choose to introduce the product as well as bending machine, it is tube bending machine, this article will conduct a brief analysis along with introduction to tube bending machine.


  • How does a tube bending machine manage?

  • How to operate your tube bending machine?

  • The progression history of tube bender.


How does a tube bending appliance operate?

The roll bending machine works on the simple principle of going the sheet metal on the desired barrel, cone, and so forth. The tube bending device is compact and easy to maintain and use. It is important to note the fact that tube bending machine must be used with other equipment.

A hydraulic bending machine as one example, the basic working principle would be to apply to bend moment by way of a reasonable pivot point as well as force point, so that the steel pipe plastic deformation. To achieve the reason for cold bending of metallic pipes under the mold is located in the front from the bender. By the hydraulic cylinder will probably be suspended in the shape is floating state using the spreader will be bent in the rear of the pipe bender in the fixture, the upper die into the lower die. The inner tube is loaded into the steel pipe and placed in the biggest market of the upper mold inner tube expansion block propped facing the inner wall with the steel pipe. So the fact that steel pipe in the bending process to prevent abnormal deformation.


How to use a tube bending equipment?

  • Determine the grounding

    The equipment tool as the core on the bender's components, it need to be well-grounded. It is not allowed to access power supply voltages that exceed the specified range, not to put and unplug plug-ins along with electricity, and not to check the control circuit using a megohmmeter, otherwise, the device might be damaged. In addition to that, no private additions and also rewiring of PC inputs as well as outputs are allowed.

  • Pre-boot arrangement

    The pipe bender is usually driven by high-pressure fat to push the plunger while in the working cylinder, generating thrust to bend the pipe through the bending parts. Need to carefully check the oil level of the oil tank towards oil level line, each and every lubrication point oiling, start the cutter to confirm the engine steering, check the fat pump for abnormal good, check the hydraulic technique for oil leakage after starting the cutter.

The tube bending machine is simple to operate, but when using it we ought to consider the above components. Any machine requires regular maintenance, and tube bending machines are no exemption. We need to frequently clean it, it is recommended that before while using the bending machine to check the bending machine's various institutional components may not be loose, regular lubrication is vital.

The development history associated with tube bender.

During your 1980s, tool materials were further developed as well as the specifications and varieties of carbide and HSS had been increasing. The emergence regarding pipe benders also took shape, although at that time the introduction of pipe benders remained stagnant on account of technical limitations.

The development of social science saw the development of different types of water line bending machines. Compared on the pipe benders of days gone by, the pipe benders of today were greatly improved in terms of quality and efficiency. For the demanding market of tv bending, the tube bending machine is rather popular.


QUICK LINK

INFORMATION

No.1 Haixin Road,Nanfeng Town Development Zone Zhangjiagangcity,Jiangsu Province,China

0086 13606222268

GET TOUCH WITH US

If you want to know more details about the pipe bending machine price or tube bending machine quality, etc., please contact us, we will reply you as soon as possible

Copyright  2020 Zhangjiagang King Macc Machinery Manufacturing Co.,ltd.