Operation, Maintenance and Training FAQ

A MOQ may vary depending on the machine model, customization requirements, and order quantity. Customers can contact GMACC for detailed MOQ information.

A Warranty terms may vary depending on the machine model and order details. Customers are advised to confirm the warranty policy with GMACC before placing an order.

A Yes. GMACC can provide customer training through experienced engineers, including installation, operation, commissioning, and maintenance guidance.

A The machine should be placed indoors in a dry environment to avoid moisture and protect machine performance.

A Hydraulic oil should normally be replaced once a year, and the oil filter should be cleaned at the same time.

A Yes. GMACC provides detailed installation and commissioning videos to support machine setup and operation.

A Yes. GMACC provides operation manuals, machine installation guidance, and commissioning videos to help customers use the machine correctly.

A 1. The hydraulic system of the machine tool adopts YA-N32 ordinary hydraulic oil (the original brand No. 20), which is replaced once a year under normal circumstances, and the oil filter must be cleaned at the same time.
2. The pressure of the hydraulic system cannot be greater than 14Mpa.
3. When manually adjusting the speed of the side pushing cylinder, the rotating arm should be adjusted when it is rotated to ≥900. The adjustment speed is synchronized with the linear speed of the edge of the rotating elbow mold. It is forbidden to push the side pushing faster than the line of the edge of the rotating mold in the manual state. speed.
4. In automatic operation in the core bending mode, before the bending arm returns, the operator must ensure that the core head is in the tube, or ensure that the mandrel is not blocked when the bending arm returns, otherwise, the core head or core rod may be Bend or break.

A