Utilization of pipe bending machine

Today, the industry is designed. No matter what sort of machine equipment, fitness tools, furniture, etc.,There are generally almost structural steel plumbing and oil pipes regarding oil, gas, fluid infusion, and they occupy necessary position in fitness gear. The large number associated with various tube types plus their complex forms possess brought many difficulties on the processing of catheters.

• Safety steps for tube bender functioning

• Steel bending machine performing procedures

• Regularization of tube bending machine

Safety steps for tube bender operations

1. When the device tool is started, pay attention to enter the swept range on the rotating arm.

2. Once the machine tool is working, all personnel are prohibited from entering the space swept by the boom and also pipe bender fittings!
   

3. The hydraulic system from the roller bending machine device adopts YA-N32 ordinary hydraulic fat (formerly No. 20), which need to be replaced once a calendar year under normal circumstances, and the oil filter must be cleaned concurrently.
   

4. When adjusting the slicer tool (mold), the adjuster will need to press the button for you to adjust. Never make adjustments by one person for the machine and the other about the control cabinet.
   

5. The core rod ought to be removed when adjusting the cutter tool or driving a strong empty car.
   

6. The pressure from the hydraulic system should not be greater than 14 Mpa.
   

7. When manually adjusting the pace of the side motivate cylinder, the rotating arm needs to be adjusted when it will be rotated to ≥900. The adjustment speed is synchronized when using the linear speed of the advantage of the rotating elbow style. It is forbidden to push along side it pushing faster than the distinct the edge of the rotating mold in the manual state. speed.
   

8. After using the general machine for a period, check the tightness from the chain to keep top of the and lower chains small.
   

9. During automatic operation while in the core bending mode, leading to a pipe bending arm results, the operator must ensure that the core head is the tube, or be sure that the core shaft is not really blocked when the twisting arm returns, otherwise, the core head or core rod might be Bend or break.
   

10. After the work has ended, cut off the electrical power supply and do a fantastic job of cleaning and also lubricating.
    

Steel bending equipment operating procedures

1. The cutter tool must be nicely grounded, and the wire shall not be not as much as 4mm2 copper soft cable. It is not allowed to connect to a power supply voltage exceeding the specified range, plug-ins can not often be plugged in and outside the plug when power is on, and the control circuit is not tested with a megohm meter, otherwise it may be damaged.

2. When plugging and unplugging the connector, do not pull the particular wire or cable to forestall the welding from tugging off.
   

3. Proximity goes, encoders, etc. cannot often be hit by hard stuff.
   

4. Do not struck the display unit having sharp objects..
   

5. The electrical box have to be placed in a ventilated area, and it is forbidden to operate in dust and corrosive gases.
   

6. It is banned to install or change the PC input in addition to output terminals without agreement.
   

7. When changing the power supply of the machines tool, the motor rotation direction have to be reconfirmed.
   

8. The roller bending machine tool really should be kept clean, and special attention ought to be paid to that there need to be no foreign matter from the sliding grooves such while clamping blocks and sliding off the road blocks.
   

9. Lubricate the chain as well as other sliding parts regularly.
   

10. The power must become disconnected during cleaning along with maintenance.
    

11. Preparation just before driving: Check whether the oil level of the fuel tank reaches the oil level range, add oil to every single lubrication point, turn on the machine to confirm the rotation in the motor, check the acrylic pump for abnormal sound, and check whether the hydraulic system is leaking after turning within the machine (the angle encoder isn't allowed Come on);
    

12. Pressure adjustment: use electromagnetic overflow valve to adjust the pressure to ensure the system pressure reaches the specified working pressure, generally not beyond 12. 5 Mpa.
    

13. Mold adjustment: mold installation requires form and clamping block to get centered, clamping block is usually adjusted with bolts; booster-style block is centered using mold, booster block is definitely adjustable; core head is centered with mold, loosen central head frame Bolt, tighten the bolt after fine-tuning the center.

Regularization of pipe bending machine

As soon as designing and arranging water pipe benders, avoid excessively substantial arcs, arbitrary curves, compound bends and in excess of 180. The arc. The excessively large arc not alone makes the tooling heavy, but also is limited from the size of the tube bending machine: the design of arbitrary curves and compound bending can be quite unreasonable, which greatly stops mechanization and automated generation, making it difficult for operators to shed heavy manual labor; A lot more than 180. The arc makes this steel bending machine unable to unload the mold.

Zhangjiagang King-Macc Machinery Manufacturing Company can offer you the best products.